Here are some more information for Kit Cables:

Steel Building Kits

Steel Building kits are an easy way to construct a new building for most any need. They have always enjoyed popularity for industrial purposes, and governmental purposes. But these kits are seeing a rise in popularity with homeowners too.

A quality-built steel building kit provides an easy to assemble building at a very competitive price and with a long life span to boot. Steel building kits are offered in various colors and sizes in order to satisfy the specifications of the customers – both residential and commercial.

The steel building kit provides strength and structural integrity. There are many types of steel buildings available, but one of the most popular for residential and smaller commercial applications is the type with a stand-alone frame. Residential (do-it-yourself) builders seem to prefer the frame kits that consist of metal studs. The frame is built just like a traditional wood frame studded building. You can see an example of this at http://www.absoluterv.com/Garage_Frame.htm
Depending upon the size of the building, you can get these studs in 2” x 3” or 2” x 4”. This type of frame system is much easier to install for most people than is an I-beam and cable structure.

In the past, you would find that most steel buildings were assembled by attaching purlins and girts to a rigid I-Beam. This heavy I-Beam bears almost the entire load stress of the building. That's why it has to be so big and heavy, requiring a forklift or crane to assemble. Using this method, the exterior panels are most definitely a part of the structural consideration. With a building that's up to 12.5 feet in height or shorter, those exterior wall panels are usually attached to only a channel running next to and parallel to the floor and then again up at eave.

Take away the exterior panels on other buildings, and you'll find there's nothing there - no support, no stability! This is why you would hear about those "heavy duty" 26 gauge panels. Those buildings need them! While this might have been appropriate for a large structure such as a horse arena, a warehouse, or the like, this construction method was not appropriate for ma and pa homeowner trying to put this together on weekends.

For smaller buildings, most people should consider the stand-alone frame buildings. The frame systems on these steel building kits are "stand alone". This means the loads are evenly distributed throughout the frame system. You can even apply siding that’s not metal – just like you would on a traditional building frame.

What does this mean to you?

•It means you won't be dealing with large I-Beams that require forklifts or cranes.
Our heaviest single component weighs 28.65 pounds!

•It means your end walls will not have those frustrating "cross-tied cable ends" that never adjust properly. This type of building won’t be "wired" together!

•It means you'll save money on your concrete/foundation because you won't need massive 3' x 3' footings to support those isolated areas of load stress.

•It means that you can use most any exterior material you want on the outside of your building: wood, stucco, brick, stone etc. You can have your building match your house, landscape or most anything else you want!

About the Author

For more information on this type of steel building kit, visit Absolute Steel and Storage at http://www.absoluterv.com. Here you can find pages of technical information, and get free pricing on steel building kits.

Are all HDMI cables compatible of displaying 1080P?

I had one that came with a psyclone 360 essentials kit that only displays in 1080i and lower. Defective HDMI cable or not all HDMI cables are full 1080P compatible?

There are two categories of cable that can be used in HDMI connections:

Standard (Cat 1):
Supports screen resolutions of 480p, 720p, and 1080i or a frequency response up to 74 MHz.

High-Speed (Cat 2):
Supports screen resolutions of 480p, 720p 1080i, 1080p at 60 frames per second, and 1080p at 120 frames per second it also supports "Deep Color" or a frequency response up to 340 MHz.

What this says is that a standard HDMI cable supports up to 1080i and doesn't have to support 1080p and a high-speed HDMI cable supports 1080p/60 and 1080p/120 Deep Color.

Does this mean that you can only get 1080p/60 with high-speed cable products?

Well, yes and no. You can get 1080p/60 with high-speed, but you may also get 1080p/60 on standard cable if it is well made. There are no guarantees though.

As long as a standard cable can pass 1080i, it has met the basic requirements. If it is not identified as passing 1080p/60, choose another brand.

If you want to know more about the HDMI interface and HDMI cables you can download the free 21 page ebook "HDMI Demystified" at the following link.
http://www.hdmisystems.com/

Training: Get fit for mountain biking, part 1
Top tips from the pros

Thanks for visiting!