Here are some more information for Case Tyan:

The computer motherboard is a key internal part of a computer system. If the CPU or processor is considered as the computers brain then the motherboard can be thought of as the heart of the computer. Although the motherboard does not boost the speed of a computer, it plays a pivotal role for the overall functionality and features of a computer system. It can at times be a really daunting task to choose the best motherboard for your computer. For getting the best output from a motherboard you should follow some of the below strategies that will help you to find out the best motherboard for your computer.

Try to find out as much as you can about the brand name or manufacturer name while choosing a motherboard. A motherboard from a well known company gives many added features like a good warranty or product quality, so try to get a motherboard from well known and reputable company. You must also make sure about the availability of technical support from the manufacturer so when you need it, it is then available. Tech support is crucial here as it is needed during troubleshooting. Among the manufacturers to consider, Tyan, Asus, Intel and Soyo. They are the market leaders and have a positive brand image among consumers.

After brand selection you have to focus on the compatibility of your motherboard with your processor. Different manufacturers provide a variety of processors such as Celeron PPGA, Pentium III, AMD Athlon and AMD K6-3. These processors need specific types of motherboards. The compatibility of the motherboard with a particular processor is the most important factor to consider.

Advanced graphics port or AGP is an appealing feature for the gamer and users who are interested in graphic design. AGP allows quicker communication between the video card and the computer thus increasing the frame rate of graphics programs and video games. So if you are a gamer or have enthusiasm about graphics design, you should choose a motherboard with higher AGP performance.

The number of PCI slots in a motherboard are an important criteria to consider when choosing a good motherboard. Plenty of PCI slots allows for the attachment of ethernet cards, sound cards or modems and for future expansion. The more PCI slots that exist in the motherboard the more ports you will have to connect such devices. Also do consider the number of USB ports on the motherboard as these are also needed to connect with modems, mice and with other devices. For video capturing and editing, you should also have a firewire port. So make sure you have a firewire port if you are interested in video capturing or editing.

While choosing your chipset, you should bear in mind the memory type that is compatible with your selected motherboard. Compatibility of the motherboard with high performance RAM is also important. For getting better performance always choose the motherboard that is compatible with all the components of the computer.

Before purchasing a motherboard you must make sure all important features are reviewed that you need. You can browse the motherboards manufacturer's website to get all the important information related to what you will need. You can download the manual from the manufacturer's website and compare the features on various motherboards. So do consider everything covered above and make sure you get the all the information you need to end up with the best motherboard for your computer system needs.

David Kranser
Pinnaclemicro The Global Online Parts Source

Buy Autodesk AutoCAD Architecture 2010 low price | Discount software Autodesk AutoCAD Architecture 2010

Buy Autodesk AutoCAD Architecture 2010 low price

Let's look at the hardware requirements - not what the box sticker says, but what I feel should be the case. I ran the AutoCAD setup on two vastly different machines. One is a simple Core 2 Duo notebook with 32-bit Windows 7 Ultimate, 4GB RAM and Intel integrated graphics - yes, interactive 3D still works on that - which is, in my mind, a bare minimum to run the software. The other is a self-made workstation with dual Intel W5590 quad-core Xeon Nehalem-EP processors, 48GB DDR3-1333 ECC RAM on the Tyan S7010 mainboard and the Nvidia Quadro FX5800 4GB high end OpenGL GPU with a special in-house optimised AutoCAD driver for the 64-bit AutoCAD version I run on it. Now, this configuration will let you fly through even very complex city models in real-time, decently rendered 3D.

As for the monitor, the 1280x800 WXGA notebook display is only good to show the menus and buttons zoomed up for publishing in this article, not for any real work. AutoCAD's dozens of menu and button bars, side menus and the usual mandatory bottom command line that's been present since my teen years, all take so much screen real estate that, in my mind, at least 1920x1200 WUXGA resolution is required to provide sufficient space for both design and access to the necessary command buttons and menus. In fact, I ran the Quadro dual Xeon setup on the Dell 2560x1600 display for truly proper design experience.

In the 2010 version, the GUI feels remotely similar to Office 2007, which is not a coincidence since all Windows AutoCAD versions have always seemed intended to look and feel quite a bit like just another Microsoft Office application. While drafting and modeling software requirements may be very different from those for, say, word processing, re-using a probably already familiar user interface from everyday work does make some sense.

Side tabs on both the left and right sides invoke a variety of libraries and settings for specific uses. My preset was architecture and 3D rendering usage, so AutoCAD pulled up the correct panels, as you can see.

To get a better feel of 3D modeling and review response, I loaded my 12MB, 10-million polygon scale model of a city near Singapore, something I spent quite a few weeks on some years ago, into both the notebook and workstation test platforms. The new navigation wheels that AutoCAD 2010 has do let you switch quickly - sometimes uncontrollably - from zooming or panning to orbiting, walking or flying through your 3D model.

While the real time response was obviously there on the workstation platform, I was pleasantly surprised to see that even the little notebook's integrated graphics could still manage reasonably useful, although not even near real-time 3D model movement in the window. Now, Intel integrated graphics do seem to handle pure polygons without textures and effects very well actually, and that's what CAD is all about.

Also, many AutoCAD old hands will probably still stick to the proven command line method of creating objects and inputting coordinates, although the sheer number of new commands and options in this release does force you to click up those GUI buttons and menus sooner rather than later. I did feel that to a certain extent the GUI options might have been a little overdone, but then you can always turn them off.

Note that AutoCAD now uses only Direct3D, rather than OpenGL, for 3D visualisation in real time. I think it should have kept the OpenGL option too, as for engineering graphics with its required high precision, Direct3D isn't exactly trustworthy yet. That's why Nvidia's own Quadro optimised driver had to be coded differently for this version. Autodesk, how about returning the OpenGL option in the next service patch?

Also, when installing the program together with the Design Review utility, the installer seemingly defaults to the 32-bit AutoCAD 2010 version even when on 64-bit Windows, while if the Design Review is not checked for install, the correct 64-bit AutoCAD version is installed. That little issue should be easy to resolve, I guess, otherwise casual users might not notice the problem and will lose the large model handling capability that the 64-bit version brings.

In summary, at first glance AutoCAD 2010 seems to finally bear the fruits of its extensive multi-year application revamp in both the core and looks departments. Do keep in mind that, just like me, you will have to spend quite a bit of time learning the new features and using them.

Discount software Autodesk AutoCAD Architecture 2010

About the Author

is this good for a gaming computer?

i want to build my own computer and wanted to know if this was any good
TYAN TEMPEST i5400PW motherboard
64 GB 800Mhz RAM
two pairs 9800 GX2's for dual 22" monitor
two intel core two Duos 3.2 GHz
6 western digital velociraptors in RAID 0 configuration
Coolermaster airbrushed blue flame case
2x Bluray burner/reader
liquid cooling
windows vista ultimate
razer lachesis mouse
logitech mx 5500 keyboard
creative labs sound blasterx-fi elite pro sound card
Yamaha YSP-4000 Multi-Channel Digital Surround Sound Projector
i like to play games like zoo tycoon 2 and sims, friend said this might be good but i want to be sure

You definitly dont need to build a sytem that huge if your just going to be playing zoo tycoon2 and sims, Thoes games dont really require that much video to play that.

and second, if you do decide for a elaborate system as the one you said, liquid cooling i have heard bad things about, like the copper eroding away causing leaks in your system shorting out your mobo.

I have a stock dell e510 with 4 gigs of ram, pentium 4 3mhz, 300gb hard drive and a 305w psu and i have a Ati Radeon hd 2600pro 512mb video card and im running games just fine. I play GTA san andreas on very high resoloution on 1280x1024 with alot of visual mods with out a problem. and that game is way more visually stressful than sims or z00 tycoon

Hope this helps you!

Fernley hosts Easter MX
FERNLEY - The Reno Over the Hill Gang Chapter staged a very rare Saturday race at the Lion's Fernley Motocross Track. Despite being Easter eve, the turn out of riders was pretty good.

Thanks for visiting!